Call Us : 804-561-2659
Email : Roger@RBMremodels.com
Here are a few photos of the framing repair as well as the remaining shingles being removed for new shingles.
We installed new rafters, ridge beam and 1/2″ OSB plywood sheathing.
After removing the shingles from the home and disposing of in a job site dumpster.
We installed lifetime asphalt dimensional shingles on the entire home.
Our roof packages include new ice and water shield, pipe collars, ridge vent and flashing.
New vinyl siding is being installed on the entire home.
Front deck is being remodeled and rear deck landing is being replaced as well
There will be plenty of progress photos of this project coming so check back often.
Please contact us with any questions or to schedule your free estimate.
This PVC decking project in Midlothian Va consisted of removing all existing deck boards and railings. We added extra framing for installation of the perimeter border and the angled decking. The products that we used on this project are Timbertech Evolutions PVC and composite decking and white Radiance railings http://www.timbertech.com/. The decking was installed using Tigerclaw hidden fastener system http://www.deckfastener.com/. All toe kicks, risers and band boards are covered with PVC white 1 x material.Evolutions is a new hybrid decking which incorporates composite decking as the core and a PVC coating to the exterior for a more durability decking option than traditional composite.
Call us for a free estimate today.
Final photos of deck remodeling project from Birkdale subdivision in Chesterfield Co
All of the decking and rails were removed from the existing deck.
A new 16′ x 18′ deck was installed 3 steps down from the existing deck height.
Framing members consist of 2 x 10 band boards and 2 x 8 floor joist.
Pressure treated flooring was ran at alternating angles at both decks.
The new deck has pressure treated railings and new vinyl lattice around the perimeter.
Contact us for a free estimate on your next remodeling project.
Here are the before and demolition pictures of a deck project in Chesterfield VA.
We removed all of the flooring, stairs and railings from the existing deck.
The new extension for the deck will be 16′ x 18′ an will provide a wonderful view of the lake.
The framing will be installed on concrete footings and 6 x 6 pressure treated post.
We will be remodeling the existing deck as well as building the new deck.
Here are a few photos of a deck that we are building in conjunction with a Florida Room.
Existing size of the deck was a 12 x 12 and we added the brick columns and new framing for the enlarged 13 x 14 deck sizing.
The deck has Timbertech evolutions composite deck installed with Tiger Claw hidden fasteners.
Rails for this project are a white T-rail style with square pickets and have aluminum stiffeners installed in them for added strength.
PVC accent boards have been installed around the perimeter and face of the stair stringers.
Lattice and siding will be installed soon on the addition so check back soon.
These photos are the before and after photos of a new set of pressure treated steps off of Lucks Ln in Chesterfield Co.
After over 20 years these steps were ready to be replaced. The steps have started to sag and do not meet today’s building codes.
We removed the original stairs and hauled away the debris. Per the customers request we narrowed the width of the stairs down a bit.
New 2 x 12 stringers were cut at the site (no pre-cuts from your local home improvement warehouse) Stringers need to be cut on site because the measurement of the height and length are fundamental in getting the proper tread length and height.
Post are placed on concrete blocks as required by Virginia building code.
Other code issues that we updated by replacing these stairs are toe kicks on front of steps, picket spacing and rail height.
Please contact is for a free deck and stair consultation.
Here are a few photos of new porch and deck addition on Chesterfield side of Lake Chesdin.
We removed all the railings and decking from the existing deck.
The deck extension is framed with pressure treated 6 x 6 support post along with 2 x 10 band and beam work.
The floor joist are 2 x 8 spaced at 16″ on center for parallel decking and 12″ on center for angled decking.
New Timbertech XLM PVC www.timbertech.com flooring has been installed using tiger claw hidden fasteners.
A new 12′ x 36′ porch roof has been built over the existing deck and a new deck was built for a hot tub and new stairs to the rear pool area.
The new roof has been engineered for minimal support columns to maximize the viewable area from the deck.
The support columns are 8″ square structural fiberglass and will be painted white.
Rafters for the porch are 2 x 8′s and there are 4 Velux skylights installed in the roof according to the home owner future use plan.
Shingles are an aspault based dimensional style that carries a lifetime warranty.
Contact us for a free consultation on your next project.
Here are a few photos of new porch and deck addition on Chesterfield side of Lake Chesdin.
We removed all the railings and decking from the existing deck.
The deck extension is framed with pressure treated 6 x 6 support post along with 2 x 10 band and beam work.
The floor joist are 2 x 8 spaced at 16″ on center for parallel decking and 12″ on center for angled decking.
New Timbertech XLM PVC www.timbertech.com flooring has been installed using tiger claw hidden fasteners.
A new 12′ x 36′ porch roof will be built over the existing deck and a new deck was built for a hot tub and new stairs to the rear pool area.
Contact us for a free consultation on your next project.
Here are a few photos of new porch and deck addition on Chesterfield side of Lake Chesdin.
We are removing all railings and decking from the existing deck.
New Timbertech XLM PVC flooring will be installed using tiger claw hidden fasteners.
A new 12′ x 33′ porch roof will be built over the existing deck and a new deck will be built for a hot tub and new stairs to the rear pool area.
Contact us for a free estimate on your remodeling project.
Deck remodel in Chester now has been completed.
We first removed all of the existing railings, lattice, flooring and deck framing that was inadequate. New footings were dug and code compliant concrete blocks are installed. We re-supported the deck and installed new decking using coated screws as well as hot dipped galvanized bolts to to secure the decking and railing materials. Band board and beams are doubled 2 x 10′s. Floor joist are 2x 8′s that can span up to 11’8″ but are only spanning 8′on this particular application. Rail post are 4 x 4 pressure treated and are installed by notching 25% of the size of the lumber and blocked between floor joist for a minimum 200lb load for safety. Flooring was installed using a coated screw fastener for virtually no movement that may occur with nailing floor decking. Please feel free to contact us for a free estimate on your next remodeling project.