Here are some final photos of a new 16′ x 20 deck and switchback landing that we are building in Chesterfield Co.

The deck has Earthwood Evolutions Timbertech flooring installed with hidden fasteners, PVC accent boards and composite railings.

Framing for the deck will have 6 x 6 support post with vinyl sleeves, 2 x 10 band and beams and 2 x 8 floor joist.

Rail supports still utilize 4 x 4 pressure treated post and have a composite sleeve installed over them.

The rails have a square balusters and are available with 2 other picket styles.

Contact us for a free estimate on your next remodeling project.

Final photo of 16' x 20 deck with switch back landing and stairs

New maintenance free deck from another angle

Photo of deck from upper landing

Here are some progress photos of a new 16′ x 20 deck and switchback landing that we are building in Chesterfield Co.

The deck will have Timbertech flooring installed with hidden fasteners, PVC accent boards and composite railings.

Framing for the deck will have 6 x 6 support post with vinyl sleeves, 2 x 10 band and beams and 2 x 8 floor joist.

Footings are 12 x 12 x 8 concrete and are spaced at 5′-7′ apart as to not encroach in basement windows.

Contact us for a free estimate on your next remodeling project.

Landing and stairs are framed and PVC accent boards are being installed

PVC accent boards being installed on band board

Here are the start photos of a new 16′ x 20 deck that we are building in Chesterfield Co.

The deck will have Timbertech flooring installed with hidden fasteners, PVC accent boards and composite railings.

Framing for the deck will have 6 x 6 support post with vinyl sleeves, 2 x 10 band and beams and 2 x 8 floor joist.

Footings are 12 x 12 x 8 concrete and are spaced at 5′-7′ apart as to not encroach in basement windows.

Contact us for a free estimate on your next remodeling project.

Before photo of area where new deck is to be installed

Deck framing has started

Here are a few photos of  the recently completed window, deck and insulated vinyl siding project.

We replaced the rear deck with a new pressure treated deck.

Installed Revere Blueprint new construction vinyl windows in the entire home.

We then removed all of the existing vinyl siding and aluminum trim so we could install new Alside Prodigy insulated vinyl siding in the color of Sage.

All of the existing aluminum and vinyl trim was removed and new vinyl soffit and PVC coated trim.

Check back soon as we will have new progress and completion photos of other projects daily.

Contact us for a free estimate on your next remodeling project.

Before photo of house to be remodeled

Final photo from front of home

Photo from rear of the home showing new siding, deck and windows

This project will include a new deck, new windows and insulated vinyl siding. We will start with the deck and see if there is any rotten sill plates and flash properly before we start the siding.

The existing deck is a 12′ x 20′ with a 4′ wide set of steps. The new deck will be 16′ x 20′ using traditional pressure treated. Support post are 6 x 6′s. Beams and bands are 2 x 10′s that are either single or doubled depending on design requirements. Floor joist are 2 x 8′s spanning no greater than 10′ at 16″ on center. Decking is a premium 5/4″ deck boards that will be ran perpendicular to the rear of the home.  All fasteners will be hot dipped galvanized.  Post for the handrails are 4 x 4 post and 44″” in height for future post caps.

Substructure for deck framing is being installed

Please feel free to ask any questions that you may have and contact us for a free estimate on your next remodeling project.

Now that the framing is completed the roof shingles are now being installed.

The rood shingles are a matching Owens Corning driftwood 3 tab asphalt shingle.

All of our new roof projects include ice and waters shield at overhangs, felt on the field, aluminum flashing, ridge vent and cap shingles.

Our roof projects are also nailed down. No staples are used to install our finished shingle products.

Roof shingles being installed and sidewall flashing being tied into the rear of the home

Contact us for a free estimate on your next remodeling project.

This project will include a new deck, new windows and insulated vinyl siding. We will start with the deck and see if there is any rotten sill plates and flash properly before we start the siding.

The existing deck is a 12′ x 20′ with a 4′ wide set of steps. The new deck will be 16′ x 20′ using traditional pressure treated. Support post are 6 x 6′s. Beams and bands are 2 x 10′s that are either single or doubled depending on design requirements. Floor joist are 2 x 8′s spanning no greater than 10′ at 16″ on center. Decking is a premium 5/4″ deck boards that will be ran perpendicular to the rear of the home.  All fasteners will be hot dipped galvanized.  Post for the handrails are 4 x 4 post and 44″” in height for future post caps.

Photo of existing deck on rear of home

Existing deck is removed and area is ready for a new deck

Please feel free to ask any questions that you may have and contact us for a free estimate on your next remodeling project.

Here is a progress photo of a maintenance free screen porch project that is ongoing in Henrico Va.

The new maintenance free screen porch will be 16′ x 16′ and will have a 10′ x 16′ deck.

Our Sliding porch panels will be installed on the exterior of this porch.

We first removed the existing pressure treated deck from the home.

Footings are dug to a depth of 18″-24″ and are inspected by an outside engineering firm.

Concrete and block will be installed in footings for porch support.

Support post will be 6 x 6 pressure treated post.

Beams, band and floor joist are 2 x 10 spaced at 16″ on center.

Screen is installed over the floor joist and Premium Cox #1 kiln dried decking.

The beam work is doubled 2 x 8′s and is supported by vinyl sleeved 6 x 6 post.

Rafters are 2 x 8′s spaced at 16″ on center.

Roof structure is being constructed

Rafters completed and ready for roof sheathing

Contact us today for your next remodeling project.

Here is a progress photo of a maintenance free screen porch project that is ongoing in Henrico Va.

The new maintenance free screen porch will be 16′ x 16′ and will have a 10′ x 16′ deck.

Our Sliding porch panels will be installed on the exterior of this porch.

We first removed the existing pressure treated deck from the home.

Footings are dug to a depth of 18″-24″ and are inspected by an outside engineering firm.

Concrete and block will be installed in footings for porch support.

Support post will be 6 x 6 pressure treated post.

Beams, band and floor joist are 2 x 10 spaced at 16″ on center.

Screen is installed over the floor joist and Premium Cox #1 kiln dried decking is installed.

Deck sub structure is being built

Photo of new porch and deck flooring completed, ready for porch roof

Contact us today for your next remodeling project.

Here is a before and start photo of a maintenance free screen porch project that has started in Henrico Va.

The new maintenance free screen porch will be 16′ x 16′ and will have a 10′ x 16′ deck.

Our Sliding porch panels will be installed on the exterior of this porch.

We first removed the existing pressure treated deck from the home.

Footings are dug to a depth of 18″-24″ and are inspected by an outside engineering firm.

Concrete and block will be installed in footings for porch support.

Support post will be 6 x 6 pressure treated post and floor joist are 2 x 10 spaced at 16″ on center.

Before photo of area where new porch and deck are to be built

Existing deck has been removed and footings being excavated

Contact us today for your next remodeling project.