Here are the start photos of a new 16′ x 20 deck that we are building in Chesterfield Co.

The deck will have Timbertech flooring installed with hidden fasteners, PVC accent boards and composite railings.

Framing for the deck will have 6 x 6 support post with vinyl sleeves, 2 x 10 band and beams and 2 x 8 floor joist.

Footings are 12 x 12 x 8 concrete and are spaced at 5′-7′ apart as to not encroach in basement windows.

Contact us for a free estimate on your next remodeling project.

Before photo of area where new deck is to be installed

Deck framing has started

Here another progress photo of a new shed project off of Otterdale Rd.

This shed is 10′ x 10′ and must match the original homes decor.

The slab for this project was existing and we drilled the slab for mounting the pressure treated floor plate.

Framing for this project is utilizing 2 x 4 framing lumber and continuous OSB sheathing on the entire building.

Rafters are 2 x 6′s spaced at 16″ on center and the ridge is a doubled 2 x 8.

A matching vinyl window was installed on the street side and a fiberglass french door with PVC brick mould and no rot jamb legs completed the widow and door package.

Wall and roof sheathing is 7/16″ OSB and is covered with a weatherproof vapor barrier.

Shingles are a dimensional design from Tamko roofing and include ridge vent.

More updates are to follow soon. Contact us for a free estimate on your next remodeling project.

Shingles are installed and exterior vapor barrier is ready for vinyl siding

Here are a few photos of  the recently completed window, deck and insulated vinyl siding project.

We replaced the rear deck with a new pressure treated deck.

Installed Revere Blueprint new construction vinyl windows in the entire home.

We then removed all of the existing vinyl siding and aluminum trim so we could install new Alside Prodigy insulated vinyl siding in the color of Sage.

All of the existing aluminum and vinyl trim was removed and new vinyl soffit and PVC coated trim.

Check back soon as we will have new progress and completion photos of other projects daily.

Contact us for a free estimate on your next remodeling project.

Before photo of house to be remodeled

Final photo from front of home

Photo from rear of the home showing new siding, deck and windows

Here is a start and a progress photo of a new shed project off of Otterdale Rd.

This shed is 10′ x 10′ and must match the original homes decor.

The slab for this project was existing and we drilled the slab for mounting the pressure treated floor plate.

Framing for this project is utilizing 2 x 4 framing lumber and continuous OSB sheathing on the entire building.

Rafters are 2 x 6′s spaced at 16″ on center and the ridge is a doubled 2 x 8

More updates are to follow soon. Contact us for a free estimate on your next remodeling project.

Photo of existing concrete slab where new shed is to be built.

Photo of shed framing in progress

Here is a progress photo of  brick veneer being installed.

The brick we are using is a special lot of Triangle Portsmouth over sized.

All square top windows have steel lintels installed while elliptical window have a round top soldier course of brick which is self supporting.

We post updates on our projects every business day so come back often and do not forget that we are on Facebook and Twitter.

Contact us if you have any questions or are considering a remodeling project in the Central Va area.

Brick is almost completed on 2 story addition

Here are a few more progress photos of an ongoing remodel in Powhatan Va.

At this point we have replace the rear deck with a new pressure treated deck and installed new construction vinyl windows in the entire home.

We are now removing all of the existing vinyl siding and aluminum trim so we can install new Alside Prodigy insulated vinyl siding in the color of Sage.

The existing trim was smooth aluminum and the new trim is PVC coated.

Check back soon as we will have new progress and completion photos of this and other projects.

Contact us for a free estimate on your next remodeling project.

Siding on the rear is almost complete

Photo of rear and left side completed

Here is our most recent photo of an attic space in Henrico Co. that we are converting to living space.

The existing attic space was strictly a utility space and storage area. We relocated and the HVAC return, framed in knee walls, a new window and partition walls. Rafters sometimes need to be framed down for today’s new energy driven building codes for insulation. Walls were insulated to R-13 and ceilings to R-38. Sheetrock for this attic measures 1/2″ in thickness and was placed in the attic when the framing was boomed up from the street.

So call us today when you want to finish a attic or basement space.